Technical data

Setting the Parameters for TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
4-8 A5E00921336-01
6. In the "Dial Rules" tab select the desired location and click on the "Edit" button
or create a new location by using the "New" button.
Result: The "Edit Location" dialog box is opened.
7. Enter the corresponding area code and the country or region in the case of a
new location.
8. Set the correct access code for local/remote calls:
If your modem is operated from a main connection, you must not specify an
access code in the "Edit" dialog box. The fields for the access code for local
calls and remote calls have to be empty.
If you are operating your modem on an extension, specify the number that
must be dialed to obtain a direct exchange line.
For example, you can specify:
- "0," or "9,,": for private branch exchange systems that do not produce any
original dial tone, there is a dialing pause of 1 s (",") or 2 s (",,") after the "0"
or "9" during dialing, with no waiting for a dial tone.
You must then under no circumstances activate the "Wait for dial tone
before dialing" check box in the "General" tab in the "Properties" Windows
dialog box.
- If you use the modem at a main connection, you may not enter an access
code.
9. Set the dialing method (tone or pulse dialing) common for your phone
connection. During pulse dialing you hear crackling noises. During tone dialing
you hear noises with varying tone heights.
10. Close the "Phone and Modem Options" dialog box and enter the phone
number of the location in the "Local Modem" tab of the "Properties…" dialog
box.
11. Exit the "Properties…" dialog box by clicking "OK".