Technical data

Setting the Parameters for TeleService

TeleService V6.1 Service Software for SIMATIC S7 and C7

A5E00921336-01

4-7

Note

• The dialog box with the connection settings can also be called up via the

Control Panel of Windows. However, the changes entered there do not have

any effect on the database in TeleService and have to be entered once again

here.

• Always define the properties of the TeleService modem as described here

directly in TeleService. This has the advantage that any changes carried out in

the Control Panel for other programs do not have any effect on the settings

selected in TeleService. As a rule the required parameters are already set so

that the entries only have to be checked.

7. Click on "OK" for TeleService to save your settings.

8. Exit the dialog box by clicking "OK".

4.3.5 Defining the Location and the Corresponding Dial Parameters

Proceed as follows:

1. Select the menu command Options > Set PG/PC Interface in TeleService.

2. Select the "TS Adapter" or "TS Adapter IE" interface. The "TS Adapter"

interface is intended for connections to a TS Adapter I/II and the

"TS Adapter IE" interface is for connections to a TS Adapter IE.

3. Click "Properties". The "Properties - TS Adapter" or "Properties -

TS Adapter IE" dialog box opens.

4. Open the "Local Modem" tab.

5. Click "Edit".

Start the "Phone and Modem Options" option in the Control Panel.

Result: The "Phone and Modem Options" dialog box is displayed.

Note

It is irrelevant by which method you specify the settings in this dialog box. Your

settings are always saved in the current system data and displayed as the default

setting when the dialog box is called up again.