Technical data

Setting the Parameters for TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
4-6 A5E00921336-01
4.3.3 Setting the General Modem Properties
Proceed as follows in order to change the settings:
1. Call up the "Phone and Modem Options" option in the Control Panel.
2. Select the "Modems" tab.
3. Select the modem whose general properties you want to change.
4. Click on the "Properties" button. The "Properties ..." dialog box then opens.
5. Select the "Modem" tab.
6. Carry out the desired changes to the general modem properties.
7. Then close the dialog box by clicking on the "OK" button.
8. Terminate the "Phone and Modem Options" options by clicking on the "OK"
button.
4.3.4 Setting the TeleService-Specific Modem Properties
Proceed as follows to set the modem properties:
1. Select the menu command Options > Set PG/PC Interface in TeleService.
2. Select the interface "TS Adapter" or "TS Adapter IE". The "TS Adapter"
interface is intended for connections to a TS Adapter I/II and the
"TS Adapter IE" interface is for connections to a TS Adapter IE.
3. Click "Properties". The "Properties - TS Adapter" or "Properties -
TS Adapter IE" dialog box opens.
4. Open the "Local Modem" tab.
5. Select the modem to be used for the remote connection from the list box. Only
the modems installed in Windows are listed.
6. Click on the "Properties" button in order to define the TeleService-specific
properties of the modem. A dialog box with the connection settings of the
selected modem opens.
Define the properties of the TeleService modem here.