Technical data

Setting the Parameters for TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
A5E00921336-01
4-5
Setting Options
You can use the Control Panel to set the modem properties specified below,
whereby these have different effects on the system and on TeleService:
• General modem properties:
Changes which you carry out on the general modem properties (volume of the
modem loudspeaker, maximum transfer rate and dial option "Wait for dial tone
before dialing") act directly on TeleService.
• Settings for the log file and further initialization commands at the
modem:
These settings which are carried out in the Control Panel act directly on
TeleService.
• Default settings:
Default settings made in the Control Panel do not affect TeleService. You
should therefore always make the default with the menu command Options >
Set PG/PC Interface. You can only carry out these default settings in
TeleService.
Note
The general modem properties, the settings for the log file as well as further
initialization commands to the modem should only be changed in the Control
Panel, "Phone and Modem Options" option.