Technical data

Setting the Parameters for TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
4-4 A5E00921336-01
4.3 Local Settings at the PG/PC End
4.3.1 Local Parameters in TeleService
Make the following local parameters in TeleService:
• The language of the TeleService application
• The monitoring times for the transmission protocol
• The interface for the directly connected TS Adapter IE
Make the following settings in the "Set PG/PC Interface" dialog box:
• The TeleService-specific modem properties
• The location and the corresponding dialing parameters
4.3.2 Useful Information on Setting Modem Properties
Saving the Modem Properties in TeleService
When you define the settings of the modem connected locally with the menu
command Options > Set PG/PC Interface, the defined settings are saved by
TeleService and are used when the next remote connection is established by
TeleService.
TeleService-specific saving of the modem properties offers the advantage that
TeleService always uses the same saved settings when establishing a remote
connection. TeleService is thus not influenced by the question which application
the modem last used, or whether the modem settings have been changed via the
Control Panel in the meantime.