Technical data

Basic Information about TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
3-16 A5E00921336-01
Logging on with the TS Adapter I/II
When you log on with the TS Adapters I/II, after you have set up access protection,
enter your user name, the corresponding password and, as an option, a callback
number:
Level of Access
Protection
Administrator/
User Password
Password Callback Number
1. enter enter do not enter or enter any
callback number
2. enter enter do not enter
If you entered a callback number during connection establishment (access
protection level 1) or you stored a callback number on the TS Adapters I/II (access
protection level 2), the modem connection is terminated and the TS Adapters I/II
calls the specified number back.
This has the following advantages:
• Unauthorized access by outside persons is almost impossible.
• The plant operator bears the main part of the phone costs.
Information
• To be sure that the callback functionality works, ensure that the settings in the
"Modem" tab correspond to the conditions at the plant.
• If you enter an incorrect callback number in the role of "ADMIN" user, you can
no longer reach the TS Adapter I/II over a remote connection!
• Tip: Test the callback number before you enter it as the "ADMIN" user by
entering the number during connection establishment (access protection
level 1).
Setting Up Access Protection
If you have a modem connection only the administrator may set up the two users,
change their settings, and delete them again, if required. If you log in as a user,
you can only change your own password and your own callback number. All the
other parameters of the TS Adapter can only be read.