Technical data

Basic Information about TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
A5E00921336-01
3-15
3.9 Useful Information on Access Protection for the
TS Adapter I/II
The TS Adapters as Supplied
Access protection is not activated when the TS Adapters I/II is delivered. The first
user who configures this adapter can therefore activate access protection by
defining the password for a user and/or a callback number.
This access protection exists only for remote connections. When using a direct
connection, you can access the parameters on the adapter at any time.
Setting Up Access Protection
When you set the parameters for your TS Adapters I/II, you can restrict access to
the parameters of the adapter as well as access to remote plants.
The protection is a multi-level access protection with one administrator and a
maximum of two users who can each define an own password and/or a callback
number.
You have the following options:
Level of Access
Protection
Administrator/
User Password
Callback Number
1. enter do not enter
2. enter enter
Access Protection Level 1
The TS Adapters I/II is protected by the user name and password. You can access
the TS Adapter from any phone and specify any callback number during
connection establishment.
Access Protection Level 2
The TS Adapters I/II is protected by the user name, password, and the callback
number. You can access the TS Adapters I/II only from one phone per user.