Technical data

Basic Information about TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
3-8 A5E00921336-01
Modem Connection with TS Adapter I/II
The option of accessing an automation system from a programming device/PC
over a modem (modem connection).
With this type of connection, the programming device or PC is connected to the
MPI/PROFIBUS network of the automation system over the remote connection and
the TS Adapter. This configuration allows you to dial directly into a remote plant.
Switching
To switch the operating mode use "Set PG/PC Interface".
Simultaneous Operation of Direct and Modem Connection
The TS Adapter II has two ports for communication with the programming device
that can both be connected at the same time. You connect the USB port with the
programming device/PC and the modem port with the telephone network. In this
configuration, you can either use the direct or the modem connection.
Simultaneous use is not possible.
Operating with TS Adapter IE: