Technical data

Installing Software and Hardware
TeleService V6.1 Service Software for SIMATIC S7 and C7
2-8 A5E00921336-01
2.6 Installing the TS Adapter and TS Adapter IE Interfaces
During the installation of the TeleService software and the software for the
TS Adapter II and TS Adapter IE, the "TS Adapter" and "TS Adapter IE" interfaces
are automatically entered in "Set PG/PC Interface".
The "TS Adapter" interface required for the TS Adapter I/II and the "TS Adapter IE"
interface for the TS Adapter IE.
If one of these two interfaces is no longer "Used Interface Configuration" list in the
"Set PG/PC Interface", you can enter this interface into the list as described below:
Proceed as follows:
1. Open the "Set PG/PC Interface" dialog box with the menu command
Options > Set PG/PC Interface.
2. Click "Select". Another dialog box opens.
3. Select the desired interface, for example "TS Adapter" or "TS Adapter IE".
4. Click "Install".
5. Close the dialog box when the installation process is completed.
Result: The list under "Used Interface Configuration" in the "Set PG/PC
Interface" dialog box now contains the entry "TS Adapter" or "TS Adapter IE".
6. Close the dialog box with "OK".