Technical data

Introducing TeleService
TeleService V6.1 Service Software for SIMATIC S7 and C7
A5E00921336-01
1-3
The following components are required so that you can use the TeleService
functionality for teleservicing:
• SIMATIC TeleService and the following extra components that are not included
in the optional package:
• A TS Adapter IE, TS Adapter II or TS Adapter I and an external modem on the
automation system side
• An analog modem or ISDN adapter or radio modem for the GSM network on
the programming device/PC side.
You require the following additional components for a PG-AS remote link:
• The PRODAVE MPI V5.0 (or later) product
PRODAVE MPI is a toolbox for the process data traffic between a
programming device/PC and SIMATIC S7/C7. It handles the data traffic
autonomously over the MPI interface.
• The supplied FB 46 "PG_DIAL" function block from the TeleService S7 Library
You require the following additional components for an AS-AS remote link:
• A second TS Adapter II, or a TS Adapter I and an external modem
• If appropriate, a further modem with cable
• The supplied FB 47 "AS_DIAL" function block from the TeleService S7 Library
You require the following additional components when sending an SMS:
• A radio modem for the GSM network
• An analog modem or ISDN adapter or radio modem for the GSM network on
the programming device/PC side.
You require the following additional components when sending e-mail:
• The supplied FB 49 "AS_MAIL" function block from the TeleService S7 Library