Technical data

TS Adapter II

Manual, 06/2008, A5E00272728-03

Properties of the TS Adapter II

1.1 Properties

Overview

The USB connection of the TS Adapter II is compatible with USB V1.1 and complies with the

specifications for a "Low-Powered" USB device. The TS Adapter II supports hibernate mode.

When used in an S7-300 system, the TS Adapter II does not loop through the I/O bus.

Therefore, the TS Adapter II should preferably be mounted in the last position on the rack.

1.2 Function

Connections

● Modem connection: The TS Adapter II allows a component running on a PC (e.g.,

STEP 7) to access automation components (S7 and C7) on an MPI/DP/PPI bus by

means of the telephone network. The TeleService application is required to establish a

remote connection.

● Direct connection: With direct connection, the TS Adapter II allows data exchange

between the programming device or PC and an S7/C7 system via the

Universal Serial Bus (USB). The TS Adapter II with direct connection corresponds

functionally to a PC Adapter USB.

The TS Adapter II can be assigned with modem connection (with an established remote

connection) and with direct connection. The TeleService application is used to assign

parameters.