Technical data

Hardware configuration of the TS Adapter II
4.8 Modem interfaces
TS Adapter II
32 Manual, 06/2008, A5E00272728-03
4.8.3 TS Adapter II-ISDN variant
The TS Adapter II-ISDN variant provides an S0 interface at the 8-pin RJ45 socket. Using the
supplied ISDN phone cable, you can connect the TS Adapter II to an ISDN S0 socket. The
length of the cable is 3 m.
ISDN phone cable
5-
5-
Note
When inserting, grasp the cable just below the RJ45 connector. Make sure the RJ45
connector engages audibly.
You can remove the connector as follows:
• Using a screwdriver, press the connector jack to the left and then remove the cable.