Technical data

Hardware configuration of the TS Adapter II
4.8 Modem interfaces
TS Adapter II
30 Manual, 06/2008, A5E00272728-03
4.8 Modem interfaces
4.8.1 TS Adapter II-Modem variant
The TS Adapter II-Modem variant has an analog modem interface with a 6-pin RJ12
connector. The supplied analog phone cable is connected to this interface. This allows the
modem to be connected to a phone socket. The length of the cable is 3 m.
Analog phone cable
Note
To use the TS Adapter II-Modem outside Germany, a TAE plug adapter for the country in
question can be applied to the RJ12 connector. For Germany, a TAE6N connector is
supplied. In some countries, phone sockets with RJ12 sockets are already available, in
which case you can use the phone cable without any TAE connector.
Connector assignment and signal description
Illustration Pin no. Signal name Signal direction Comments
1
2
3 b1
4 a1
Bidirectional Incoming wire
pair
5
1
2
3
4
5
6
6