Technical data

TS Adapter II
Manual, 06/2008, A5E00272728-03
3
Preface
Purpose of this manual
This manual provides a complete overview of the TS Adapter II and supports you in the
installation and commissioning of the software and hardware. It explains the requirements for
operation and hardware installation, and how to connect the adapter to MPI/DP/PPI
networks.
It is intended for programmers and persons involved in configuring, commissioning, and
servicing of automation systems.
Required basic knowledge
This manual requires general knowledge of automation engineering.
You also require knowledge of the use of computers or PC-based equipment (such as
programming devices) operating on Windows 2000 and Windows XP platforms.
Scope of this manual
This manual applies to the TS Adapter II product.
Network approval for Europe
The TS Adapter II-Modem is compliant with the European Standard TBR 21.
The TS Adapter II-ISDN is compliant with the telecommunications registration TBR 3.
Network approval for the USA
This equipment complies with ACTA.
Network approval for Canada
The Industry Canada (ic) label identifies certified equipment.