Technical data

Hardware configuration of the TS Adapter II
4.7 Power plug for power supply
TS Adapter II
28 Manual, 06/2008, A5E00272728-03
4.7 Power plug for power supply
Supply system connection
The 24 V supply voltage can be delivered via the MPI/DP interface cable or the power cord
for the power supply. The 24 V infeed socket is located at the bottom of the module front
panel.



9
9
① RS232 serial interface
② MPI/DP socket
③ Infeed socket for power supply
Connectable cables for 24 V power plug On TS Adapter II
Solid wires No
Flexible cables
• Without end sleeve 0.25 mm
2
to 2.5 mm
2
• With end sleeve 0.25 mm
2
to 1.5 mm
2
Number of conductors per terminal 1 cable or 2 cables up to 1.5 mm
2
(total) in a
common end sleeve
Diameter of the cable insulation Max. 3.8 mm
Stripped length 11 mm
End sleeves in accordance with DIN 46228
• Without insulating collar Design A, 10 mm to 12 mm length
• With insulating collar Form E, up to 12 mm long