Technical data

Hardware configuration of the TS Adapter II
4.2 LEDs on the TS Adapter II
TS Adapter II
Manual, 06/2008, A5E00272728-03
21
4.2 LEDs on the TS Adapter II
Overview
The TS Adapter II is equipped with the following LEDs:
● 3V operating voltage
● Bus fault
● USB
● DCD
● RX/TX
76$,,02'(0
6)
%86)
'&9
5;7;
'&'
86%
6,(0(16
Figure 4-3 LEDs of the TS Adapter II
SF Group error
BUSF Bus fault
DC3V 3V operating voltage
RX/TX RX/TX
DCD DCD
USB USB
Startup characteristics
All LEDs are switched on when power is restored. After a few seconds, the LEDs are set
according to the current operating state.