Technical data

Requirements for operation
3.3 Installation
TS Adapter II
16 Manual, 06/2008, A5E00272728-03
3.3.2 Installation on a DIN rail
Requirement
The DIN rail is mounted.
Tools required: 3-mm screwdriver
The enclosed slide must be inserted into the rear panel of the TS Adapter II from below.
Figure 3-2 Slide for installing the TS Adapter II on a DIN rail
Installing TS Adapter II
1. Hook the TS Adapter II onto the DIN rail.
2. Swivel the TS Adapter II back until the slide engages audibly.


Figure 3-3 Installing TS Adapter II