Technical data

Requirements for operation
3.3 Installation
TS Adapter II
Manual, 06/2008, A5E00272728-03
15
3.3.1 Installation on mounting rail
Procedure
The various module installation steps are explained below.
1. Place the TS Adapter II at the of the profile rail. Unlike S7-300 modules, the TS Adapter II
does not require a bus connector. Hook the TS Adapter II onto the rail (1), slide it over
until it reaches the module on the left (2), and swing it down into place (3).
2. Hand-tighten the screws on the TS Adapter II.