Manualshelf

Technical data

ManualsBrandsSiemens ManualsNetwork CardSIMATIC PC Adapter TS Adapter
11121314151617181920
Requirements for operation
3.3 Installation
TS Adapter II
14 Manual, 06/2008, A5E00272728-03
3.3 Installation
Types of installation
You can install the TS Adapter II as follows:
● On the mounting rail of the S7-300 (see section "Installation on mounting rail"). Make sure
that you use the lost slot of the mounting rail since the TS Adapter II does not loop
through the signals of the I/O bus, or
● On the DIN rail (see section "Installation on DIN rail").
WARNING
The mounting rail or DIN rail on which the TS Adapter II is installed must be grounded.
Rear panel of the TS Adapter II:
Figure 3-1 Rear panel of the TS Adapter II