Specifications

Chapter 11. Running the I/O Driver 195
11. Running the I/O Driver
Once you configure the driver, you can start it running. Running the driver helps you
determine if the datablocks are configured as you intend. When you are satisfied that
the driver is configured correctly, you can configure FIX/iFIX to start the driver for
you automatically.
While the SI7 I/O driver runs you can view its statistics from the Power Tool. These
statistics can help you troubleshoot any difficulties you may encounter.
Use the following links to learn how to start the driver and view statistics while the
driver is running:
• Starting and Stopping the I/O Driver
• Viewing Statistics
Starting and Stopping the I/O Driver
Use the following links to learn how to start and stop the SI7 driver:
• Starting the I/O Driver from the Power Tool
• Starting the I/O Driver from the SCU
• Setting the I/O Driver for Automatic Startup in FIX/iFIX
• Starting the I/O Driver Manually from Mission Control
• Stopping the I/O Driver
Starting the I/O Driver from the Power Tool
You can start the SI7 driver manually from the Power Tool or automatically.