Specifications

190 Siemens Simatic S7 Driver Online Help
See Also
Specifying Signal Conditioning in Database Manager | Specifying I/O Addresses in
Database Manager | Specifying the I/O Driver in Database Manager
Opening the Power Tool from Database Manager
You can configure the SI7 driver from Database Manager by opening the Power Tool.
To open the SI7 I/O Driver Power Tool from Database Manager
Select SI7 from the Drivers menu. Any devices or datablocks that you added
appear in the Tree Browser.
See Also
Verifying New Datablocks Created in Database Manager | Saving Datablocks
Created in Database Manager to the Configuration File
Preparing to Create Datablocks Automatically in
Database Manager
Database Manager uses the default settings for datablocks when you add a new
database block that refers to an undefined address. Default values may already be set
for your application. To determine the default values, open the SI7 I/O Driver Power
Tool and select Templates from the Options menu. When the Templates dialog box
appears, you can display the default channel, device, and datablock values by
selecting a tab. To change a value, refer to Setting Default Values for Channels,
Devices, and Datablock Properties.
See Also
Feature: Creating Datablocks Automatically in Database Manager | Verifying New
Datablocks Created in Database Manager | Saving Datablocks Created in Database
Manager to the Configuration File