Operating instructions

Passive Components for Electrical Networks
4-5
SIMATIC NET Tw isted-Pair and Fiber-Optic Networks
C79000-G8976-C125-02
Shielding
Each pair of wires is shielded by two plastic laminated aluminum foils with an
external contact surface. All the pairs making up the cable are surrounded by a
braided shield of tin-plated copper wires (coverage approximately 90%).
SIEMENS SIMATIC NET INDUSTRIAL ETHERNET ITP 6XV1 850-0AH10
I 0086m
Meter marker
(consecutive number)
Surrounding braided shield
(tin-plated copper braid)
Pair shield
(plastic laminated
aluminum foil)
Plastic foil
Blind elements
(pair 2)
Blind elements
(pair 1)
Pair 1 (white/blue)
Pair 2 (white/orange)
Pair shield
(plastic laminated
aluminum foil)
Blind element
Pair 1 (white/blue)
Pair 2 (white/orange)
Plastic foil
Surrounding braided shield
(tin-plated copper braid)
Outer s heath
(green)
Outer s heath
(green)
Figure 4-2 Structure o f the Two-Pair Industrial Twisted Pair Standard Cable
Labeling
The standard cable is labeled as follows:
”SIEMENS SIMATIC NET INDUSTRIAL ETHERNET ITP”.
If the cable is supplied without connectors, the label above is followed by the order
number “6XV1850-0AH10”.
There are also markers at one meter intervals. These make it simple to check the
length of the cable.