Operating instructions

Installation, Commissioning, Cleaning and Maintenance

Industrial Ethernet OSM/ESM

C79000-Z8976-C068-04

Installation in Pairs in the 19" Cubicle

To install in pairs in the 19" cubicle, you require the two securing angles supplied.

1. First screw the two OSMs/ESMs together using the supplied holding plate on the

rear.

2. Fit two of the supplied angles to the sides

3. Secure the two devices using the angles in the 19" cubicle. Please note that the

OSM/ESM must be grounded with a low resistance via the two holding angles.

Figure 27: Installation in the 19" Cubicle

Interconnecting the devices at the rear