Operating instructions

Technical specifications

8.3 Ambient conditions

MP 377 15" Touch daylight readable (WinCC flexible)

56 Operating Instructions (Compact), 04/2009, A5E02532357-01

8.3 Ambient conditions

Mechanical ambient conditions

The following table provides information on the type and scope of tests for mechanical

ambient conditions.

Test Test Standard Release values

Vibration IEC 60068, Part 2–6 (sinusoidal) 10 Hz ≤ f ≤ 58 Hz

constant amplitude: 0.075 mm

58 Hz ≤ f ≤ 150 Hz

constant acceleration: 1 g

• Type of vibration:

Transitional rate of the frequency: 1 octave/minute.

• Vibration duration:

10 frequency cycles per axis in each of the three mutually vertical axes

Shock IEC 60068, Part 2–29 15 g peak value, 11 ms duration

• Shock type: Half-sine

• shock direction:

in each of the three mutually vertical axes always with 3 shocks in ± direction

Climatic ambient conditions

The following table shows the climatic conditions for operation of the HMI device.

Ambient conditions Permitted range Remarks

Temperature 0 to 50 °C –

Temperature shock 0 to 50 °C, cycling time >=

3 Kelvin/min

–

Humidity, relative 10 to 90 % Without condensation, corresponds

to a relative humidity, exposure level

2 conforming to IEC 61131, part 2

Atmospheric pressure 1 080 hPa to 795 hPa Corresponds to an elevation of –1

000 to 2 000 m

< 0.5 ppm

Relative humidity < 60 %

No condensation

Test 10 cm

; 10 days Pollutant concentration

S < 0.1 ppm

Relative humidity < 60 %

No condensation

Test 1 cm

; 10 days