Operating instructions

Configuring the operating system
6.4 Control Panel
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
99
Icon Functions Tab / entry
Changing transfer settings "MPI"
Changing the PROFIBUS DP transfer settings "PROFIBUS"
Setting the screen saver
Reducing the backlighting
–
Displaying the system information "General"
Displaying memory information "Memory"
Setting the device name of the HMI device "Device Name"
Configuring the data channel "Channel"
Setting the delay time "Directories"
Setting the uninterruptible power supply "Configuration"
State of uninterruptible power supply "Current Status"
Setting operation feedback with key and
touch screen operation
Setting operation feedback with key operation
Setting acoustic signal for inadvertent operations
"Volume"
Assigning sounds to events. "Sounds"
Changing e-mail settings
2)
"Email"
1)
Only with MP 377 Touch
2)
Additional tabs may appear in the "WinCC flexible Internet Settings" dialog. This depends on
the options that have been enabled for network operation in the project.
6.4.4 Operating the Control Panel
6.4.4.1 Overview
Operator input options
The hardware of the HMI device determines, which of the following operator control options
are available:
● Touch screen
The operating elements shown in the dialogs are touch-sensitive. Touch objects are
basically operated in the same way as mechanical keys. You activate operating elements
by touching them with your finger. To double-click them, touch an operating element
twice in succession.
● HMI device keyboard
The operating elements shown in the dialogs are selected and operated using the keys of
the HMI device.
● External USB keyboard
● External USB mouse