Operating instructions

Configuring the operating system
6.4 Control Panel
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
97
6.4.2 Opening the Control Panel
Introduction
The HMI device Control Panel can be opened as follows:
● Independently of a running project
– Press the "Control panel" button in the loader.
– By calling up from the Windows CE start menu.
● With active project
An operating element must be configured to open the control panel for this purpose.
Procedure – open the Control Panel via the Start menu
Proceed as follows:
1. Open the Windows CE start menu.
– Procedure using the keys:
Select the
ESC
+
CTRL
key combination.
– Procedure using the touch screen:
Press the
key twice on the alpha-numeric VDU keyboard.
2. Select "Settings > Control panel".
Result
The control panel is opened.