Operating instructions

Configuring the operating system
6.1 Loader
MP 377, MP 377 PRO (WinCC flexible)
90 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
The following figure shows the open start menu.
Depending on the software installed, other symbols may be displayed in the
desktop's status bar.
Open Loader
The following options are available to open the Loader:
● The Loader appears briefly after starting the HMI device.
● The Loader appears when the project is closed.
If configured, use the relevant operating element to close the project.
For further information on this, refer to your plant documentation.
Key operation in the Loader
The following table shows the key combinations for navigating in the Loader.
Key combination Function
, ,
TAB
The next or previous entry is selected.
ENTER
or
}{
The selected button is operated.