Operating instructions

MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
89
Configuring the operating system
6
6.1 Loader
Overview
The following figure shows the Loader. The header line contains details of the loader
version. These details are not shown in the following figure.
The Loader buttons have the following functions:
● Press the "Transfer" button to set the HMI device to "Transfer" mode.
The transfer mode can only be activated when at least one data channel has been
enabled for the transfer.
● Press the "Start" button to start the project on the HMI device.
If you do not perform an operation, the project on the HMI device will automatically start
after a delay.
● Press the "Control Panel" button to open the control panel of the HMI device.
You can change various settings in the Control Panel, for example, the transfer settings.
● Press the "Taskbar" button to activate the taskbar with the Windows CE start menu open.