Operating instructions
Operator controls and displays
5.5 Labeling the function keys on the MP 377 12" Key
MP 377, MP 377 PRO (WinCC flexible)
86 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
5.5 Labeling the function keys on the MP 377 12" Key
Introduction
You can label the function keys as required for your project. Use the labeling strips for
this purpose.
Preprinted key labeling strips may be ordered as accessories,
see section
Accessories (Page 26).
Note
Do not write on the keyboard to label the function keys.
Printing labeling strips
WinCC flexible comes with a range of labeling strip templates. You can find additional
information on the location of the templates in the WinCC flexible online help.
Any printable and writable foil can be used as labeling strips. You can use transparency film,
the keyboard membrane of the HMI device is printed on the reverse side. Use transparent
foil so that the LEDs of the function keys can be seen.
The permitted thickness of the labeling strip is 0.13 mm. Paper labeling strips
are inappropriate.
Dimensions of the labeling strip for the MP 377 12" Key
$UHDZKLFKFDQEHZULWWHQDQGSULQWHGRQ
[r
ದ
ದ
[r