Operating instructions

Mounting and connecting

4.3 Connecting the HMI device

MP 377, MP 377 PRO (WinCC flexible)

62 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0

4.3.2 Ports

The following figure shows the ports of the HMI device MP 377.





  



① Power supply connector

② RS-422/RS-485 port X10 / IF1b

③ PROFINET, 2 ports X1 P1 and X1 P2

④ USB, ports X20 and X21

⑤ Line in and micro

⑥ Line out

Connect PROFIBUS DP or MPI to the X10 / IF1b port.

You can affix the USB and PROFINET connecting cables to the rear panel of the HMI device

with cable ties.