Operating instructions

Mounting and connecting

4.2 Installing the HMI device

MP 377, MP 377 PRO (WinCC flexible)

60 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0

6. Fasten the HMI device to the support arm ①.

In doing so, ensure that all connections are fed (without damage) through the adapter into

the inside of the HMI device.

7. If you want to connect the cables at a later point in time, fasten the housing rear panel ⑦

to the HMI device.

Result

The HMI device is fitted and can be connected electrically.