Operating instructions

Mounting and connecting
4.2 Installing the HMI device
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
55
Positions of mounting clamps on the MP 377 12" Touch
The following figure shows the counting direction for the insertion of the mounting clamps.
The following table shows the positions of the mounting clamps on the MP 377 12" Touch.
Observe the counting direction.
Page Number of mounting
clamps
Position 1 Position 2 Position 3
Top 3 2 11 20
Right 3 2 9 16
Bottom 3 2 11 20
Left 3 2 9 16
Positioning the mounting clamps on the MP 377 12" Key
A total of 10 mounting clamps are needed for mounting. Fit mounting clamps
in all the cutouts.