Operating instructions

MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
53
Mounting and connecting
4
4.1 Checking the package contents
Check the package content for visible signs of transport damage and for completeness.
NOTICE
Damaged parts
A damaged part will cause the HMI device to malfunction.
Do not install parts damaged during shipment. In the case of damaged parts, contact your
Siemens representative.
The following is included in the product package of the MP 377 mounting device:
● HMI device
● Accessory kit with mounting clamps and mains terminal
The following is included in the product package of the MP 377 PRO:
● HMI device
● Basic adapter for fixing to a support arm
● Four screws for fitting the basic adapter
● Mains terminal
Additional documents may be included in the product package of all HMI devices.
The documentation belongs to the HMI device and is required for subsequent
commissioning. Retain all enclosed documentation for the entire service life of the HMI
device. You must pass on the enclosed documentation to any subsequent owner or user of
the HMI device. Make sure that every supplement to the documentation that you receive is
stored together with the operating instructions.