Operating instructions

Operating recipes
10.7 Operating the simple recipe view
MP 377, MP 377 PRO (WinCC flexible)
268 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
10.7.6 Transferring a recipe data record to the PLC
Introduction
In order for an edited recipe data record to take effect in the process, you must transfer the
values to the PLC.
The display values in the recipe view are always transferred to the PLC.
Requirements
A screen with a simple recipe view is displayed.
Procedure
Proceed as follows:
1. If the recipe list contains several recipes: Select the recipe which contains
the desired recipe data record.
2. Select the element list of the recipe data record whose values you want
to transfer to the PLC.
3. Open the menu.
4. Select the menu command "1 To PLC".
Result
The values of the recipe data record were transferred to the PLC and take effect
in the process.