Operating instructions

Operating recipes
10.7 Operating the simple recipe view
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
265
10.7.3 Editing a recipe data record
Introduction
Edit the values of the recipe data records in a simple recipe view.
Synchronization with the PLC
If you want to display the current recipe values from the PLC in the simple recipe view,
you first have to read the current values from the PLC with the menu command
"2 from PLC" in the element list.
The values changed in the recipe view only take effect in the PLC when you transfer
the edited data record to the PLC with the menu command "1 to PLC".
Requirements
A screen with a simple recipe view is displayed.
Procedure
Proceed as follows:
1. If the recipe list contains several recipes: Select the recipe which contains
the desired recipe data record.
2. Open the data record list.
3. Select the recipe data record you want to change.
4. Open the element list.
5. Change the values of the records as required.
6. Save your changes with the menu command "0 Save".
The recipe data record is saved.
Result
The edited recipe data record has now been saved in the selected recipe.