Operating instructions

Operating recipes
10.7 Operating the simple recipe view
MP 377, MP 377 PRO (WinCC flexible)
264 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
Key control of the menu
Select the required entry using or . Press
ENTER
.
Alternatively, press the numerical key with the number of the desired menu command.
The command is executed.
Operating the recipe screen
You operate the recipes in a recipe screen with the operating elements provided by the
configuration engineer.
Further information on this may be available in your plant documentation.
10.7.2 Creating a recipe data record
Introduction
Create a new recipe data record in the recipe list or in the record list. Then enter the values
for the new record in the element list and save the record.
Requirements
A screen with a simple recipe view is displayed.
Procedure
Proceed as follows:
1. If the recipe list contains several recipes: Select the recipe for which you want to create a
new recipe data record.
2. Open the recipe list menu.
3. Select the menu command "0 New".
A new record is created.
The element list of the new record opens.
4. Enter values for the elements of the data record.
The tags of the record can be assigned default values depending on the configuration.
5. Open the element list menu and select the menu command "0 Save".
6. Enter a name for the new record.
7. Confirm your entries.
If you change the new data record number to an existing data record number, the existing
data record is overwritten.
Result
The new recipe data record is saved to the selected recipe.