Operating instructions

Operating recipes
10.6 Operating the recipe view
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
261
10.6.7 Transferring a recipe data record to the PLC
Introduction
In order for an edited recipe data record to take effect in the process, you must transfer the
values to the PLC.
The display values in the recipe view are always transferred to the PLC.
Requirements
A screen with a recipe view is displayed.
Procedure using the touch screen
Proceed as follows:
1. If the recipe view contains several recipes: Select the recipe which contains
the desired recipe data record.
2. Select the recipe data record whose values you want to transfer to the PLC.
3. Touch
.
Procedure using the keys
Proceed as follows:
1. If the recipe view contains several recipes: Select the recipe which contains
the desired recipe data record.
2. Select the recipe data record whose values you want to transfer to the PLC.
3. Press
CTRL
+ .
Result
The display values in the recipe view were transferred to the PLC and take effect
in the process.