Operating instructions

Operating recipes
10.6 Operating the recipe view
MP 377, MP 377 PRO (WinCC flexible)
260 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
10.6.6 Reading a recipe data record from the PLC
Introduction
In the current project, the values which are also stored in the recipes in the HMI device can
be changed directly in the plant. This is the case, for example, if a valve was opened further
directly at the plant than is stored in the recipe. The values of the recipe data records saved
in the HMI device possibly no longer match the values in the PLC.
To synchronize the recipe values, read the values from the PLC and display them in the
recipe view.
Requirements
A screen with a recipe view is displayed.
Procedure using the touch screen
Proceed as follows:
1. If the recipe view contains several recipes: Select the recipe which contains the desired
recipe data record.
2. Select the recipe data record to which you want to apply the values from the PLC.
3. Touch
.
The values are read from the PLC.
4. If you want to store the displayed values in the HMI device, touch the
button.
Procedure using the keys
Proceed as follows:
1. If the recipe view contains several recipes: Select the recipe which contains the desired
recipe data record.
2. Select the recipe data record to which you want to apply the values from the PLC.
3. Press
CTRL
+ .
The values are read from the PLC.
4. If you want to store the displayed values in the HMI device, press the keys
CTRL
+
ENTER
.
Result
The values were read from the PLC, displayed on the HMI device and saved to the selected
recipe data record.