Operating instructions

Overview
1.5 Accessories
MP 377, MP 377 PRO (WinCC flexible)
26 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
1.5 Accessories
Accessories are not included in the product package of the HMI device, but can ordered in
the Internet at "
http://mall.automation.siemens.com".
RS 422 to RS 232 converter
The converter is required for the connection of controllers of other manufacturers. Connect
the RS 422 to RS 232 converter to the RS 422 / RS 485 interface. The converter converts
the input signals to RS-232 signals.
Order number for RS 422 to RS 232 converter: 6AV6 671-8XE00-0AX0.
90° elbow adapter
If space is limited, you can use an elbow adapter at the RS 422/RS 485 interface.
Order number for 90° elbow adapter: 6AV6 671-8XD00-0AX0.
Protective foil for HMI devices with touch screen
The protective foil prevents the touch screen from being scratched.
The protective foil can be ordered using the following order numbers:
HMI device Order no.
MP 377 12" Touch 6AV6 574-1AD00-4CX0
MP 377 15" Touch
MP 377 PRO 15" Touch
6AV6 574-1AD00-4EX0
MP 377 19" Touch 6AV7 672-1CE00-0AA0
Clamping frame
A clamping frame is available for the MP 377 12" Touch. If the material thickness around the
mounting cutout is < 2 mm, the clamping frame allows IP65 degree of protection or
enclosure type 4X/Type 12 to be achieved.
Order number for clamping frame for MP 377 12" Touch: 6AV6 671-8XS00-0AX0.
Key labeling strips
For the MP 377 12" Key, a kit containing two sets of blank key labeling strips can be ordered.
Order number for key labeling strips: 6AV6 574-1AB00-2BA0.