Operating instructions

Operating recipes
10.6 Operating the recipe view
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
255
Operating elements of the recipe view
The following table shows the operating elements of the recipe view.
Buttons Key combination Functions
CTRL
+
}{
Creates a new recipe data record.
If a start value is configured, it is shown in the text box.
CTRL
+
ENTER
Saves the displayed values of the recipe data record.
The storage location is predefined by the project.
CTRL
+
*
The recipe data record is saved under a different name irrespective
of the recipe view. A dialog box opens in which the name is entered.
CTRL
+
INS
DEL
The displayed recipe data record is deleted.
CTRL
+
=
The values of the recipe view are synchronized with the associated
recipe tags. The values changed during editing are written to the
associated recipe tags. Subsequently all the values of the tags are
read out and updated in the table.
CTRL
+
The recipe values from the PLC are displayed in the recipe view.
CTRL
+
The values of the set recipe data record displayed in the recipe view
are transferred to the PLC.
Operating the recipe screen
You operate the recipes in a recipe screen with the operating elements provided by the
configuration engineer.
Further information on this may be available in your plant documentation.
10.6.2 Creating a recipe data record
Introduction
You create a new recipe data record by modifying an existing record. You then save the
modified data record under a new name.
Requirements
A screen with a recipe view is displayed.