Operating instructions

Operating alarms
9.4 Displaying infotexts
MP 377, MP 377 PRO (WinCC flexible)
242 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
9.4 Displaying infotexts
Displaying infotext
The configuration engineer can also provide infotext for alarms.
Procedure using the touch screen
Proceed as follows:
1. Touch the desired alarm in the alarm view or the alarm window.
The alarm is selected.
2. Touch the
button in the simple alarm view or in the enhanced alarm view.
If configured, the infotext assigned to this alarm is displayed.
3. Close the screen for displaying the Infotext by means of the
button.
Procedure using the keys
Proceed as follows:
1. Select the desired alarm in the alarm view.
2. Press
HELP
.
If configured, the infotext assigned to this alarm is displayed.
3. Close the infotext by pressing key
HELP
.