Operating instructions

Operating a project
8.12 Project security
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
227
8.12.3 User logon
Logon dialog
Use the logon dialog to log on to the security system of the HMI device. Enter your user
name and password in the logon dialog.
The logon dialog opens in the following cases:
● You are operating an operating element with password protection
● You are operating an operating element that was configured for displaying the logon
dialog
● You activate the "<ENTER>" entry in the simple user view
● You activate a blank entry in the extended user view
● The logon dialog will be automatically displayed when the project is started, depending on
the configuration
Further information on this may be available in your plant documentation.
Requirements
The logon dialog is open.
Procedure using the touch screen
Proceed as follows:
1. Enter the user name and password.
Touch the corresponding text box. The alphanumerical screen keyboard is displayed.
2. Select "OK" to confirm logon.