Operating instructions

Operating a project
8.11 Operating the Sm@rtClient view
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
221
Monitoring mode
On a Sm@rtClient view which is configured for monitoring mode, you can only monitor the
remote HMI device. You cannot control its operation.
Operation
Note
It is not possible to operate the direct keys of the remote HMI device from the
local HMI device.
The available operating elements depend on the HMI devices used:
● Same type of HMI devices
You can operate the project of the remote HMI device with the operating elements of
your HMI device
● Operate keys from a local touch screen
All the keys of the remote HMI device are displayed as buttons on the touch screen.
You can also touch them to operate them
● Touch operation from a local HMI device using keys
You operate the buttons in the usual manner.
8.11.2 Touch operation
Operator input options
The Sm@rtClient view can be operated as follows:
● Starting remote control
● Forcing permission
● Ending remote operation