Operating instructions

Operating a project
8.11 Operating the Sm@rtClient view
MP 377, MP 377 PRO (WinCC flexible)
220 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
Requirements for forcing
The following requirements must be fulfilled in order to force values:
● The "Control Value" column must be available
● The "Write" button must be available
Procedure for forcing a value
Proceed as follows:
1. Enter the address of a value for each line. Enter the desired control value in the "Control
Value" column. Select the respective fields and enter the values using the keyboard.
2. Once you have entered all of the desired control values, press the
CTRL
+
ENTER
key.
Result
The values from the "Control Value" column are transferred once to the PLC.
Alternative procedure
Alternatively, you can also select the buttons and using the key
TAB
and operate it using key
ENTER
.
8.11 Operating the Sm@rtClient view
8.11.1 Overview
Application
The Sm@rtClient view enables you to monitor and remotely operate the current project of a
remote HMI device. With the correct configuration, several equal priority HMI devices can
access a remote HMI device.
Note
If another HMI device accesses your HMI device via the Sm@rtClient view, this leads to an
additional load on your HMI device.
Layout
In the Sm@rtClient view, the remote HMI is displayed with the complete layout.
Depending on the configuration, you can monitor and also operate this screen.
You can also operate the function keys like buttons on an HMI device with a touch screen.