Operating instructions

Commissioning a project
7.9 Transferring and transferring back license keys
MP 377, MP 377 PRO (WinCC flexible)
188 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
Procedure for transferring a license key back
Proceed as follows:
1. Switch to "Transfer" mode on the HMI device.
2. When transferring back using WinCC flexible:
Select the "License Keys" command in the menu "Project > Transfer".
The Automation License Manager opens.
When transferring back using the Automation License Manager:
Start the Automation License Manager via the Windows Start menu.
3. In the Automation License Manager, select the command "Connect HMI device" in the
menu "Edit > Connect target system".
The "Connect Target System" dialog opens.
4. Under "Device Type", select the appropriate HMI device type.
5. Select the type of connection from the "Connection" box.
6. Set the connection parameters.
7. Select "OK".
The connection to the HMI device is established. The connected HMI device is displayed
in the left window of the Automation License Manager.
8. In the left window, select the HMI device.
The right window displays the available license keys.
9. Drag one or more license keys from the right window and drop them on the destination
drive in the left window.
The license keys are transferred back to the storage location.
Result
The license key is transferred back from the HMI device to the storage location.