Operating instructions

Configuring the operating system
6.17 Restoring from external storage device
MP 377, MP 377 PRO (WinCC flexible)
156 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
Procedure
Proceed as follows:
1. Press the "RESTORE" button to open the "Storage Card" dialog.


① No storage card available
② Only one storage card containing backup is allowed. No storage card detected. Insert a
storage card and press the "Refresh" button.
2. Select the external memory with the backup from the "Storage Card with Backup
detected" selection box.
The "--- no storage card available ---" message appears if there is no external memory in
the HMI device or if this memory is defective.
3. If the "--- no storage card available ---" message appears, press the "Cancel" button.
Restoring is then aborted.
– Insert a memory card or a different one.
– Click on the "Refresh" button.
The content of the selection box will be changed.
– Select the external memory with the backup from the "Storage Card with Backup
detected" selection box.
4. Click on the "Start Restore" button.
Restoring is started.