Operating instructions

Configuring the operating system
6.15 Configuring network operation
MP 377, MP 377 PRO (WinCC flexible)
148 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
6.15.5 Changing e-mail settings
Requirements
You have opened the "WinCC flexible Internet Settings" dialog with the
"WinCC Internet Settings"
icon.



① Setting the SMTP server
② Name for the sender
③ E-mail account
Note
Additional tabs may appear in the "WinCC flexible Internet Settings" dialog. This depends on
the options that have been enabled for network operation in the project.
Procedure
Proceed as follows:
1. Specify the SMTP server.
– Activate the "Use the default of the project file" radio button if you want to use the
SMTP server configured in the project.
– Deactivate the "Use the default of the project file" radio button if you do not want to
use the SMTP server configured in the project. Specify the required SMTP server.
2. Enter the name for the sender in the "Sender" text box.
3. Enter the e-mail account for your e-mail in the "Authentication" text box.
Some e-mail providers only allow you to send mail if you specify the e-mail account. The
"Authentication" text box can remain empty if your e-mail provider allows you to send mail
without checking the account.
4. Confirm your entries.
The dialog closes.
Result
The e-mail settings have been changed.