Operating instructions

Configuring the operating system
6.14 Changing transfer settings
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
141
8. If you want to view the profile data, press the "Busparameter" button of
the PROFIBUS dialog.
The profile data are displayed. The "Profile" dialog is read-only.
NOTICE
The bus parameters must be the same for all stations in
the MPI/PROFIBUS DP network.
9. Close the "Profile" dialog.
10. Confirm your entries.
The dialog closes.
Result
The MPI/PROFIBUS DP settings of the HMI device have been changed.
See also
Configuring the data channel (Page 136)