Operating instructions

Configuring the operating system

6.12 State of uninterruptible power supply

MP 377, MP 377 PRO (WinCC flexible)

Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0

133

Result

Port monitoring for the UPS is set.

See also

State of uninterruptible power supply (Page 133)

6.12 State of uninterruptible power supply

Introduction

If you have connected a UPS to a USB port, you can display the monitoring state of this port.

Requirements

You have opened the "UPS Properties", dialog "Current status" tab with the "UPS" icon.



① The "UPS program is not running. No current status available." message appears when the

UPS is not connected.

Procedure

Proceed as follows:

1. Installing the UPS monitoring software.

2. Connect the UPS.

3. If you want to update the monitoring state, press the "Update" button.

The message is changed according to the current setting. The message will remain

unchanged if no check boxes in the "Configuration" tab have been activated.

Result

The current monitoring state for the UPS is displayed.