Operating instructions

Configuring the operating system
6.8 Changing HMI device settings
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
121
Requirement
You have opened the "Printer Properties" dialog with the "Printer" icon.







① Selection box for the printer
② Interface selection box
③ Network address of the printer
④ Paper format selection box
⑤ Group orientation with radio buttons for print orientation
⑥ Print quality check box
⑦ Color printing check box
Procedure
Proceed as follows:
1. Select a printer from the "Printer Language" selection box.
2. Select the port for the printer from the "Port" selection box.
3. If you wish to print via the network, enter the printer's network address in
the "Network" text box.
4. Select the paper format from the"Paper Size" selection box.
5. Activate a radio button in the "Orientation" group.
– "Portrait" for portrait
– "Landscape" for landscape
6. Select the print quality.
– Select the "Draft Mode" check box if you wish to print in draft mode.
– Clear the "Draft Mode" check box if you wish to print with higher quality.
7. If the printer selected can print in color and you wish it to do so,
activate the "Color" check box.
8. Confirm your entries.
The dialog closes.
Result
The settings for the printer have now been changed.